background image

03

04

Safety Instructions

 
Requirements For Riders: (the following persons shall not ride the product)
Ⅰ.Persons under the age of 18.
Ⅱ.Pregnant women or persons unable to engage in vigorous physical activity due to illness.
Ⅲ.Persons under the influence of alcohol or drugs.
Ⅳ.Persons whose weight exceeds prescribed limits (see P26 "Model Parameters").

Pre-riding Inspection
●Check  if  tires  have  no  cracks,  no  abnormal  abrasion,  no  nails,  stones,  glass  and  other 
foreign bodies embedded in. 
●Tire pressure of 32.6 psi (225 kPa) is required for normal riding.
●Check if axle screws are tightened.
●Check if the handlebars and the front and rear wheels are fixed: to ensure that the handle-
bars are fixed, the front and rear wheels are stable without shaking, and can work normally.
●Check if the reflector is broken or contaminated.
●Check the status of power circuit and lighting circuit to ensure operate normally
●Check if the front and rear brake system can work normally.
●Make sure the battery capacity meets the riding requirements.
●Check the torque of spokes: tighten it immediately if loose (1.5N·m-2.5N·m)
●Check if the throttle is smooth without stuck and if it can return to idle position normally.
●Check the chain condition: the chain has its floating space under normal conditions. If it 
gets stuck, please clean and lubricate the chain.
●Check the belt condition: Belt silencer can be used to eliminate the abnormal sound. Please 
clean the belt if there are any obstacles.
●Check if the inner tube of the front fork is clean.
●Check the back shock absorption inner tube is clean.
●Check if the front and rear brakes can brake normally and ensure there is no damage to the 
brake cable.
 
Riding Instructions:     
●When riding, do not use mobile phone, camera, earphones, earplugs, etc, to avoid distrac-
tion.

supposed to ensure your safety. Do not wear slippers or high heels when riding. 

●This product contains many electrical parts, so please do not leave it in the rain for too 

long.

●Precautions for bike washing: please remove the battery before washing. It is prohibited to 

use high-pressure washer to directly wash the battery or other electrical parts.

●Do not immerse the battery in water. (With damaged appearance, the waterproof perfor-

mance of the battery will be  damaged.) The wading depth cannot exceed the center of the 

wheel,    otherwise  it  may  damage  the  battery  and  cause  severe  injury.  It  is  forbidden  to 
charge the battery under the circumstances above, otherwise it will cause fire, burning or 
even explosion.
●Modifications  to  the  Light  Bee  may  render  the  vehicle  unsafe  and  may  cause  severe 
personal injury. For your safety, please do not modify this product without the manufactur-
er's permission.Surron will not take liability for non-approved modifications. If your parts on 
the bike need to be replaced, please contact your local authorized dealer.
●If alarm or warning code is triggered, please stop using the bike immediately and contact 
your local authorized dealer for professional guidance or maintenance service.
 
Requirements For Riding Conditions:
●Do not ride in extreme weather or if the rider is not in good health condition. When riding 
in the rain or in the snow, braking distance will be extended, so please avoid riding in heavy 
rain and other extreme weather conditions.
●Ride slowly and be careful under the complicated road conditions. When riding this bike at 
high speed over obstacles including uneven, wet, loose ground, steep slope or sharp bend, 
you may lose control of riding resulting in collision, fall or injury.
●Please avoid riding in heavy rain or ponding area. When the depth of the water on the road 
exceeds the wheel center, it may affect the function of the motor and the brake. This bike may 
be used in the rain and snow, but not for long time deep wading. The recommended wading 
depth is within 20cm.
●The working temperature of this product is -10~45℃ (-50°F~113°F) and storage tempera-
ture  is  -10~50℃  (-50°F~122°F).  The  recommended  storage  temperature  is  10℃  to  30℃
(50°F~86°F). Please store or ride under the temperature within the range above.

●According to the local laws and regulations, it is prohibited to ride in public road and bike 

lanes.

●This is a performance motorcycle and should be treated with extreme caution. You are 

obligated to know the laws in your area and to comply with related laws and traffic rules.

● User under 18 years old is not allowed to use this product.

●Before using this product, you must have motorcycle riding license and are recommended 

to have the necessary proper motorcycle riding skills after professional training.

●Read all additional warnings and product instructions in this Owner’s Manual, as well as 

safety labels, before operating your electric motorcycle. Please find an open and safe place 

to practice in order to fully understand the bike and get the basic riding skills of the bike and 

know its structure, which is the premise of safe riding.

●Never permit a guest to ride your electric motorcycle without proper instruction. Do not 

lend this bike to people who are unfamiliar with it, so as to avoid injury. Please make sure 

that the rider (you or others) has read the instructions and watched the instructional video 

before  riding  alone.  Persons  unwilling  or  unable  to  take  responsibility  for  their  actions 

should not use this motorcycle. You assume all responsibility while operating your bike. 

●Proper  safety  gear,  including  a  regionally  approved  helmet,  goggles,  riding  boots, 

gloves, and protections should be worn while riding to reduce the risk of potential injury.

●Do not park inside the building, evacuation staircases, walkways and emergency exits.

●Follow the local fire hazard regulations and laws.  Do not charge or park in residential 

buildings. Charging should be kept away from combustibles and never over charging.

●This product is ridden by one person only, please do not take any passenger or carrying 

other items.

●When  riding,  please  wear  loose,  cuff-tightened  clothes  in  bright  colors  which  are 

●Read all additional warnings and product instructions in this Owner’s Manual as well as 
safety labels before operating your electric motorcycle. Please find an open and safe place to 
practice in order to fully understand the bike and get the basic riding skills and be familiar 
with its structure, which is the premise of safe riding. Proper safety gear, including a region-
ally approved helmet, goggles, riding boots, gloves, and protections should be worn while 
riding to reduce the risk of potential injury. According to the local laws and regulations, it is 
prohibited to ride in public road and bike lanes.
●During  normal  riding,  do  not  use  sudden  acceleration  and  hard  brake  in  order  to  save 
battery power, protect parts on the bike, improve range and bike’s service life.
●If  any  abnormality  occurs  while  riding,  please  stop  riding  immediately.  Do  not  use  this 
product until the cause of the abnormality is identified and repaired. Please contact your 
local authorized dealer immediately. 

Usage Instructions:  
●Place the product on a flat road and do not forget to turn off the key switch. Otherwise, it 
could cause the bike slip which would cause injury to you and others. Do not place the bike 
on a slope or on soft ground to prevent the bike from falling over!
●Please be sure to use the manufacturer’s lithium-ion battery charger. The charger input 
voltage  is  110V.  Store  the  product  safely  before  charging.  Do  not  charge  the  bike  if  the 
charger and charging port are damaged. Do not charge or park in the non-parking area. 
Make sure the bike stays away from combustibles when charging and disconnect the power 
supply after fully charged.
●Do not charge the battery below 0℃ (32°F), otherwise the battery cells will be damaged. 
Please charge the battery when the temperature is appropriate for charging    .    

Summary of Contents for Light Bee QL3000DY



















Reviews: