background image

Welcome

Label Position

01

Thank  you  for  choosing  the  Surron  Light  Bee  electric  off-road  motorcycle.  This  product 
conforms with quality standard of Chongqing Qiulong Technology Co.,Ltd.

For  your  safety,  please  read  this  manual  carefully  before  riding  the  bike.  Please  keep  this 
manual properly. Do not ride until you fully understand this bike. Do not use the bike until you 
are familiar with its performance, operation, and maintenance. All pictures in this manual are 
for reference only. This manual contains the word WARNING to indicate something that could 
hurt you or others. It also contains the word CAUTION to indicate things that could damage 
your bike.

02

The  pictures  in  this  manual  are  for  reference  only.  Please  refer  to  the  actual 

appearance and functions of the bike.

Riding Warning Label

High Voltage Warning 

Battery Warning Label

Controller Label Location 

Designed by SUR-RON in China

MODEL:XXXXXXXXXXX

        PN:xxxxx-xxxx-xxxx

        SN:XXXXXXXXXXX

     H/W:XXXXXXXXXXX

     S/W:XXXXXXXXXXX

Frame Plate Location

VIN Label

X X X X X X X X X X X X X X X

Bike Vehicle Identification Number (VIN) Label

Summary of Contents for Light Bee QL3000DY



















Reviews: