7
www.surfacemaxx.com
USING THE TELESCOPING WAND
1. The trigger handle features a lock button to prevent
unintentional use. To lock, slide the lock toward the
trigger so the lock symbol is shown. To unlock, slide
the lock away from the trigger so the unlock symbol
is shown.
2. Connect the high pressure hose of your pressure
washer to the inlet coupler on the telescoping wand.
3. The telescoping wand can be used retracted, extended, or at any point in between. To adjust the
length of any of the wands, open the lock lever, move the wand to the desired length, then close
the lock lever to secure.
4. Before attempting to use the telescoping wand on your project, move away from the project area
and extend the wand to 50% of its available length. Depress the trigger to release a stream of
water so that you can get a feel for how the unit will perform during use.
5. The telescoping wand will kickback when the trigger is released and/or pressure is lost. Before
releasing the trigger, move the nozzle at least 10 feet away from the surface being cleaned and
make sure you have solid footing.
1
2
Hose with
threaded
coupler
Hose with quick
connect coupler
Quick
connect
adapter
Safety
lock
See Figures 1 - 2.
To reduce the risk of electrocution, possible serious
personal injury or property damage, spray the pressure
stream in a safe direction away from all electrical
devices and bystanders. Ensure proper connection of all
accessories before starting any cleaning project. Fits
most pressure washers. Ensure compatibility and proper
fit before using this accessory. Wear safety glasses or
goggles; do not point at people, pets, electrical devices.
Turn off the pressure washer before changing or
adjusting accessories. For cold water use only. For
outdoor use only – store indoors. Save these instructions.
Refer to them frequently and use them to instruct other
users. If you loan someone this tool, loan them these
instructions also.
WARNING:
Do not use pivoting nozzles when using the telescoping
wand. Pivoting nozzles can increase the risk of kickback
and could result in possible serious personal injury.
WARNING:
NOTE:
Always engage the trigger lock before moving
or adjusting the telescoping wand.
NOTE:
The inlet coupler on the telescoping wand is
designed to connect to a threaded connector on your
pressure washer’s high pressure hose. If your high
pressure hose has a quick connect coupler instead,
install the adaptor provided before connecting to the
telescoping wand.
NOTE:
Never fully extend the wands. Do not extend beyond the lines marked on the wands. This
allows 4 in. of wand to remain inside the next section to help provide stability during operation.
