SureCall, Inc | 1-888-365-6283 | [email protected] | www.surecall.com
SureCall, Inc | 1-888-365-6283 | [email protected] | www.surecall.com
8
Step 3. Install the Booster and Inside Antenna
Choose a location for the booster and inside antenna that is near a working outlet and at least 25 Ft from the
outside antenna. Consider the below factors affecting booster performance.
1. Signal strength at the location of the outside antenna.
2. Interior building materials between the inside antenna and your mobile device.
3. Distance between the outside antenna and inside antenna (minimum 25 ft. separation)
Panel Antenna
Panel Antenna
SureCall’s Inside panel antennas are directional with a 120˚ reach. They should be
mounted facing the area signal is needed and away from the outdoor antenna (See “Aiming
Antennas”).
Mount on a vertical surface that is the approximate height of normal cell phone use. The
antenna may be concealed behind a wall provided there are no materials that could obstruct
signals.
Besides the antenna itself, parts include mounting equipment for a flat horizontal
surface.
1. Using plate, mark position of desired screw placement.
2. Screw mounting plate into place with the slide panel protruding towards you.
3. Slide antenna securely onto mounting plate.
4. Connect antenna to one end of the SC-240 cable and run to planned location
of your booster
5. Place the booster on a flat surface or mounted to a wall and connect the
remaining end of the SC-240 cable to booster port marked INSIDE.
Caution: Do Not aim antennas towards one another.
Aiming Antennas
Installation
Mounting
Plate
Screws
SC-240
