background image

SureCall, Inc  |  1-888-365-6283  |  [email protected]  |  www.surecall.com 

SureCall, Inc  |  1-888-365-6283  |  [email protected]  |  www.surecall.com 

12

Note: The term “IC” before the radio certification number only signifies that Industry Canada technical specifications were met.

Specifications

SPECIFICATIONS

Model

Fusion Professional

Uplink Frequency Range (MHz):

698-716 / 776-787 / 824-849 / 1850-1915 / 1710-1755

Downlink Frequency Range (MHz):

728-746 / 746-757 / 869-894 / 1930-1995 / 2110-2155

Maximum Gain:

72 dB

Supported Standards:

CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO, LTE and all cellular standards

Max Uplink Power:

26.0 dBm

Input Impedance:

50Ω donor port / 50Ω server port

Noise Figure:

8 dB

AC Input:

Input AC110V, 60 Hz; Output DC 5-15V

Maximum Output Power:

1 Watt EIRP

Cable:

SC-400 / SC-240

RF Connectors:

N Female (outdoor) / N Female (indoor)

Power Consumption:

<15W

Operation Temperature:

-4º to +158º F

Dimensions:

7.875 x 5 x 1.188 inches

Weight:

2 LB 3 oz

Certifications:

FCC ID: RSNF4HOME3, IC: 7784A-F4HOME3

FCC 27.50(d)(4) Statement:

 Fixed, mobile and portable (hand-held) stations operating in the 1720-1755 MHz band are limited 1 Watt 

EIRP. Fixed sta tions operating in this band are limited to a maximum antenna height of 10 meters above ground. Mobile and portable 

stations operating in this band must employ a means for limiting power to the minimum necessary for successful communications.

Summary of Contents for FusionProfessional

















Reviews: