SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | [email protected]
15
Specifications
Product Name
Fusion4Home-Max
Uplink Frequency Range (MHz):
75 Ω
72dB
8 dB
CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO, LTE and all cellular standards
Input AC110V, 60 Hz; Output DC 5-15V
3 Watt EIRP
RG 6 and/or SC-240
F- Female (both ends ) / One F-Female and One N-Female
<15W
7784A-FUSION4HM
Downlink Frequency Range (MHz):
Supported Standards:
AC Input:
Maximum Gain:
Noise Figure:
Input Impedance:
Maximum Output Power:
Cable:
RF Connectors:
Power Consumption:
Dimensions:
Operation Temperature:
-4ºF to +158ºF
Weight:
IC:
2 LB 3 oz
7-7/8” X 5” X 1-3/16”
698-716 / 777– 787 / 824-849
1850-1915 / 1710-1755 ( G Block Included )
728-746 / 746 – 756 / 869-894
1930-1995 / 2110-2155 ( G Block Included )
15
Your signal booster has
no power.
Verify that the switch on the power supply is turned on and green LED is
ON. Connect the power supply to an alternate power source.
Be sure the power source is not controlled by a switch that can remove
power from the outlet.
Check the green POWER LED on the signal booster. If it is OFF, return the
power supply to SureCall. Contact tech support at:
The
Alert
LEDs flash red after
the initial activation period.
The
Alert
LEDs continue
to flash
Lower the dial above the blinking LED by 5dB (for example, from
65 to 60) and monitor the bars on your cell phone to see whether
reception has improved.
The singal booster shuts down automatically, and then restarts after
60 seconds. Turn down the
PCS, Cellular
or
LTE/AWS
dial that
is oscillating dial that is to prevent the signal booster from shutting
down automatically.
Problem
Resolution
1-855-846-2654
https://www.signalbooster.com | 1-855-846-2654 | [email protected]
