SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | [email protected]
11
Installing Your Hardware
Installing the SC-249W or SC248W Panel Antenna
Step 1. Choose a location for mounting the antenna on vertical surface. Ideal height off the
ground or floor should be the approximate height of your cell phone when in use.
Step 2. Using plate, mark position of desired screw placement with pencil or marker.
Step 3. Screw mounting plate into place with the slide panel protruding towards you.
Step 4. Slide antenna securely onto mounting plate.
Note: Be sure to provide enough separation from outside antenna. Panel antenna should
not face outside antenna.
Step 4. Install the Signal Booster
1. Select a location close to a working AC outlet. Do not expose the signal booster to exces-
sive heat, direct sunlight, moisture, and airtight enclosures.
2. If you’d like to mount the booster to a wall, mark location of screw tabs on the wall in
the desired location
3. Use supplied screws or appropriate screws for surface of mounting location and drill
Installing the SC-121W Right Angle Antenna:
Connect the SC-121W antenna by firmly screwing it onto the inside port of the Fusion4Home-Max
Booster. For best results, the antenna should be mounted in an upright position. The right angle
antenna cable connects directly to the amplifier port labeled “Inside”.
11
https://www.signalbooster.com | 1-855-846-2654 | [email protected]
