SureCall | 1-888-365-6283 | [email protected] | www.surecall.com
14
Option C: Indoor Panel Antenna
The provided panel antennas are multi-band directional antennas with a 120˚ reach. They
should be mounted facing the area signal is needed. It is also important that they do not point
toward the outdoor antenna. Range of antenna is dependent on three factors:
1. Physical obstructions
2. Power generated by booster
3. Signal level received by the outdoor antenna
Besides the antenna itself, parts include mounting equipment for
a flat horizontal surface. You can also install your interior antenna
behind a wall provided there are not materials that could obstruct
signals.
For Each Indoor Panel Antenna:
1. Choose location for mounting antenna on vertical surface. Ideal height off the ground or
floor should be the approximate height of regular cell phone use.
2. Using plate, mark position of desired screw placement.
3. Screw mounting plate into place with the slide panel protruding towards you.
4. Slide antenna securely onto mounting plate.
Installation
Important:
Storage and transportation: Store and place in non-extreme room-temperature and dry
environment This antenna should not be used near open fire or flame.
For kits with a single indoor antenna:
4. Connect female antenna connector to a the indoor antenna cabling provided with your kit
and run along route toward the planned location of your booster.
For kits with multiple indoor antennas:
1. Connect each indoor antenna to the cable provided with your kit and run along route
toward the planned location of your booster. Join all cables to provided cable splitter.
2. Connect one end of the provided cable to the remaining port of the cable splitter labeled
INPUT and route cable to the planned location of your booster.
Note: Be sure to provide enough separation from outdoor antenna (at least 50 ft. is
recommended).
