SureCall | 1-888-365-6283 | [email protected] | www.surecall.com
10
Planned
booster
location
Outdoor
Cable
Outdoor Omni
Installation
Pole-mount
hardware
Omni antenna with
surface mount
hardware
Option B: Omni Antenna
The omni antenna is omni-directional, which receives and sends signals in
a 360º radius. The provided hardware allow for either a surface mount or
pole-mount. The antenna should be mounted in an upright position. See
illustration.
Mount antenna to a vertical surface:
1. Using vertical plate of L-bracket, mark position of desired placement.
2. Place vertical L-bracket into desired location and tap the screws, head
first, along with sleeve, into stucco 1/2 to 5/8 inches deep into place.
(Note: Alternate screws may be required for different surfaces such as
wood or concrete.)
3. In this order, place washer, lock washer and nut on each screw and
tighten until secure. When tightening screw, sleeve will expand to
secure plate.
4. Use provided screws to secure antenna base onto horizontal plate.
5. Connect antenna to cable connector for the outdoor cable provided
with your kit and run along route to planned location of your booster.
Mast
(not provided)
Cable
L-Bracket
U-Bolts
Washers
Nuts
Cable
Anchors /
Sleeves
Screws Washers
Nuts
L-Bracket
