30
5.10
Maintenance Chart
5.10.1
Daily maintenance
Check battery acid level, if required replenish destilled water.
Charge battery.
Check if machine is damaged or impaired in any way.
Check condition of dust filter and clean if necessary.
Empty dust container.
Search brush - roller tunnel for jammed particles and seized up dirt
that may narrow the brush tunnel and obstruct free roller brush
movement.
5.10.2
After each 50 operating hours also
Check if battery leaks acid.
Clean and grease battery poles.
Check if sweeping rollers are worn or cluttered. Replace if required.
Check sweeping contour, readjust if required.
Check if side brush adjustment is worn, if required readjust or re-
place.
Cleaning the frictional wheel and the driving belt (with nitro-thinner,
benzene or brake cleaner)
5.10.3
After each 100 operating hours also
Check cable isolation, replace cables if required.
Check if cable connections are tight.
Clean dust filter, replace if necessary.
Search suction for obstacles, clean.
Conduct trial run to check all operating elements.
Check if roller drive chain is elongated or loosened.
Check all bearings for wear.
Check if seals are damaged or dislocated.
5.10.4
After each 200 operating hours also
Check operation of electric motor.
Check if carbon brushes are worn, replace if required.
Summary of Contents for ST1000E with TRS
Page 2: ...2 25 11 2014 ...
