6
When the package is received, if there is no
external damage proceed to opening it,
making sure that all material is inside. If the
package upon delivery shows signs of
tampering (
Fig. n°8
), impact or fall, it is
necessary to present the damage to the
carrier, and within 3 days of the delivery
date, indicated on
the documents, make a
precise report of the damage. Do
not
1.2 - CHECKING THE PACKAGE UPON DELIVERY
Heavy package. Do not lift manually
unless with help of at least three people
(
Fig. n°5
).
Move the package only by electrical
trolleys or manually, equipped with
lifting straps (
Fig. n°6
).
Do not expose the package to humidity
or rain (
Fig. n°4
).
Since the center of gravity is not in the
middle of the package, moving it
suspended by chords or similar
systems is not advisable (
Fig. n°7
).
Fig. n°4
Fig. n°6
Fig. n°5
Fig. n°8
Fig. n°7
23
pH
Fig. n°47
6.2.2 - Cleaning the blade, the bladeguard and the ring
Unscrew the blade cover tie rod (3) and
remove the blade cover (2) (Fig. n°50).
The blade cover can now be cleaned.
Clean the front face of the blade, al-
ways moving away from the centre of
the knife to reduce risk of injury, (fig 51)
Remove the blade as follows:
Remove the sharpening device (Fig. n°
52 & 53 ref. a)
Rotate the blade so that the two tread-
ed holes (d) in the blade are horizontal
Fit the knife remover (b) onto the blade
by aligning the two thumb screws (e) to
the two threaded holes (d) in the blade,
partially screw in the two thumb screws.
Unlock and partially unscrew the blade
retaining screws (f), complete the tight-
ening of the thumb screws (e).
Finish unscrewing the blade retaining
screws (f) and remove them. Remove
the blade remove complete with the
blade. This part ONLY can be cleaned
in a dishwasher.
WARNING
there is a split in the blade
remover to allow the remover to fit onto
the blade, therefore once the blade and
remover are removed from the slicer
GREAT CARE must be taken when
cleaning around the split to avoid injury.
Clean around the blade ring guard
Refit parts in reverse order
Fig. n°48
Fig. n°49
Fig. n°50
a
d
f
b
e
c
3
2
1
with warm water, the equipped
detergent or neutral detergent (pH 7)
Fig. n°47.
Summary of Contents for SSG300PTB
Page 2: ...2 27 ...
