Short Tapered Styles'Flat Tops'And Short Cuts
● Starting with the longest attachment comb (12mm), cut from the back
of the neck to the crown. Hold the attachment comb flat against the
head and slowly move the clipper through the hair, as shown (see
diagram 8).
● Use the same procedure from the lower
side to the upper side of the head,
as illustrated. Cut the hair against the
direction in which it grows from the front
to the crown and then level the cut with
the sides.
● To give a 'flat top' look, the hair on top
of the head must be cut over the top of a
flat comb instead of using the attachment
comb.
● Use closer cutting attachment combs to
taper the hair down to the neckline as
desired. Comb hair and check for uneven
areas and outlining sideboards and
neckline as described previously.
1. This marking indicates that this product should not be disposed of with
other household wastes throughout the EU.
2. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources.
3. To return your used device, please use the return and collection
systems or contact the retailer where the product was purchased.
4. They can take this product for environmentally safe recycling.
9
10
STEPS FOR HAIR CUTTING
DISPOSAL
diagram 6
Summary of Contents for HC415SA
Page 8: ...HC415SA Hair Clipper 11...
