SUPRENT HC415SA, Quick Start Manual

Page: 6 / 8

Step 1-Nape of The Neck
1. Attach comb attachment 3mm or 6mm.
2. Hold the clipper cutting edge pointed up
and begin the haircut, starting at the centre
of the head at the base of the neck (see
diagram 1).
3. Hold the clipper comfortably in your hand
and hold lightly against the head with the
comb teeth pointing upward.Gradually and
slowly lift the clipper working upwards and
outwards, through the hair, trimming just a
little at a time.
4. As you cut, gradually lift the clipper head
towards you. Continue to cut the back area
from the bottom of the neck upwards to the
top of the ears.
Step 3-Side of The Head
● Change to one of the shorter combs 3mm or
6mm, trim sideburns, i.e. the hair directly in
front of the ears.Change to one of the longer
combs, 9mm or 12mrn, and continue to cut
to the top of the head (see diagram 3).
Step 2-Back of The Head
● Change to the next longest comb attachment
9mm or 12mrn and cut the back of the head
(see diagram 2)
Step 5-The Finishing Touch
● Finally, use the Taper Lever without an attachment comb for close
trimming around the base of the neck, the sides of the neck and the
ears.
● To produce a clean straight line at the
sideburns, reverse the Clipper by turning
the reverse side uppermost (see diagram 7).
● Press the Clipper at right angles to the
head, tips of the blades lightly touching
the skin and work downwards. This way will
obtain, as a clean cut as would be given by
a razor.
Step 4-Top of The Head
● Using the comb attachment 9mm or 12mrn, cut top of head from
back to front against the direction in which the hair normally grows
(see diagram 4). In some cases, this may require the reverse, or
cutting from front to back.
● Comb attachments 3mm or 6mm are used to achieve a close crew cut
or short cut.
● For longer hair on top, use the comb provided and lifts hair on the
top of the head. Cut over the comb, with the hair lifted or hold the
hair between the fingers to lift it and cut it to desired length (see
diagrams 5 and 6). Always work from the back of the head. Hair
can be cut shorter gradually by reducing the space between the
comb/fingers, and the head. Comb out trimmed hair and check for
uneven strands.
7 8
STEPS FOR HAIR CUTTING STEPS FOR HAIR CUTTING
diagram 4
diagram 1
diagram 2
diagram 3
diagram 6
diagram 7
diagram 5
diagram 5