6.
Connecting Flexible Tubing with Quick Connectors: JG (John Guest) and QC (Quick Connector)
Disconnect Flexible Tubing:
1)
Remove safety clip from the quick connector (if applicable) (Fig. 1).
2)
Press on the flange of quick connector (Fig. 2).
3)
Pull out flexible tubing (Fig. 3).
Connect Flexible Tubing:
1)
Push the flexible tubing 1.5 cm (0.6 in) deep into the quick connector (Fig. 4)
2)
Insert safety clip (if applicable) (Fig. 5).
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
6.1. Instructions for connecting and disconnecting filter cartridge and elbow connector (new filter cartridge with elbow connector)
Disconnecting elbow connector from filter cartridge:
1) Remove safety clips from quick connector (fig.1).
2) Push quick connector's flange symmetrically and pull the tubing out (fig. 2).
3) Unscrew inlet and outlet connectors from old filter cartridge (fig.3)
4) Remove old Teflon tape (fig.4).
5) Apply mutliply layers of new Telfon tape (ensure that Telflon tape is winded in the opposite direction to the direction connector
will be installed) (fig. 5).
Connecting elbow connector with filter cartridge:
1)
Screw the elbow connector back to new filter cartridge.
NOTE! Do NOT remove elbow connector after the installation has been started. Stopping and removing (unscrewing) the
element may result in inadequate connection and water leak. (fig.6).
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
7. Faucet installation
1) Drill a 12 mm hole in the kitchen sink surface. For enamelled sinks,
the manufacturers recommend drilling the holes in the sink's
support structure or the countertop.
2) Put metal washer 2 and the rubber seal 3 on the threaded faucet
connector.
3) Mount the faucet in the previously drilled hole.
4) From the underside of the countertop, put washers 4, 5 (rubber), 6
(metal), and tighten with nut 7.
5) Connect the water tubing linking the faucet with the system:
- place the metal nut 10 and plastic clip 9 on the tubing 11
- push insert 8 into the tubing
- push the tubing (all the way) inside the faucet connector and hand
tighten it with the nut you previously placed on the tubing.
NOTE: To seal the threaded connections, use teflon tape during the
installation. This doesn't apply to threads for plastic and faucet
nuts.
supreme
best water solutions
10
11
1
2
3
4
5
6
7
8
9
F-2
