background image

20

Heatseeker Solar Pool Heating 

Installation & User Manual

WARRANTY AGREEMENT

Definitions

 All capitalised expressions used in this warranty 

are defined in paragraph 17.

Warranty

2   Supreme Solar Pty Ltd warrants that its services 

in installing the Product will be carried out 

with due care and skill and subject to clauses 

3, 4, 5 and 6, that the installed Product will be 

free from defects in workmanship for a period 

of twenty four (24) months after installation 

(warranty includes in field labour costs.) The 

warranty is given subject to the terms of this 

warranty agreement.

3   The Solar Collector included in the Product 

carries:

 

(a)    in the case of a Strip Collector, a ten (10) 

year limited warranty from Procom Plastics 

Extrusions Pty Ltd, 38 McGregors Drive, 

Keilor Park, Victoria, 3042 (Phone: (03) 9331 

7589,  

Email: [email protected]); or  

 

(b)   in the case of an Evacuated Tube Collector, 

a ten (10) year limited warranty from 

Supreme Solar Pty Ltd, 2/19 Enterprise 

Drive, Bundoora, Victoria, 3083 (Phone: 

(03) 9460 4200,  

Email: [email protected]); or

 

(c)   in the case of an UniPanel® Collector, a ten 

(10) year limited warranty from Supreme 

Solar Pty Ltd, 2/19 Enterprise Drive, 

Bundoora, Victoria, 3083 (Phone: (03) 9460 

4200,  

Email: [email protected]);

 

 

 For the purpose of this warranty, impact of 

hail is defined as penetration of hail stones 

completely through the panel or cracks 

or splits of the panel around the point of 

impact. This warranty applies in the case of 

hail measuring up to 25cm diameter in size, 

as per AS2712.

 

 Any labour, travel and freight costs incurred are 

excluded from this warranty. Such costs are to be 

paid by the original purchaser.

 

 and is the only warranty given in respect of that 

part of the Product.

4   The Automatic Controller included in the Product 

carries:

 

(a)   in the case of an Aqua-Gen 3D Automatic 

Controller, a one (1) year limited warranty 

from Space Age Electronics Pty Ltd, PO Box 

4382, Homebush South, New South Wales, 

2140  

(Phone: (03) 5629 5833,  

Email: [email protected]; or

 

(b)   in the case of an Aqua-Gen 3/+ Series, 

AquaGen 5 Series or SSV Series of 

Automatic Controllers, a three (3) year 

limited warranty from Dontek Electronics 

Pty Ltd, 19 Melrich Road, Bayswater, 

Victoria, 3153 (Phone: (03) 9762 8800,  

Email: [email protected]); 

or

 

(c)   in the case of an Aqua-Gen 2 Automatic 

Controller, a two (2) year limited warranty 

(temperature sensors not covered) from 

Dontek Electronics Pty Ltd, 19 Melrich Road, 

Bayswater, Victoria, 3153 (Phone: (03) 9762 

8800, Email: service@dontekelectronics.

com.au);

 

 and is the only warranty given in respect of that 

part of the Product.

5   The Solar Pump included in the Product carries:
 

(a)   in the case of an SSGL Series Solar Pump, a 

two (2) year limited warranty (six (6) months 

for commercial installations) from Supreme 

Solar Pty Ltd, 2/19 Enterprise Drive, 

Bundoora, Victoria, 3083 (Phone: (03) 9460 

4200, Email: [email protected]);  

or

 

(b)   in the case of a BX Series Pump a three (3) 

year warranty from AstralPool Australia Pty 

Ltd, 111 Indian Drive, Keysborough, Victoria, 

3173 (Phone: 1300 186 875, Email: service@

australpool.com.au);

 

 

 

 A twelve (12) month in field labour warranty is 

applicable in Capital City Metropolitan areas or 

within a 20km radius of an Authorised Supreme 

Solar P/L or an AstralPool Australia Pty Ltd 

Service Agent.

 

 and is the only warranty given in respect of that 

part of the Product.

6   All other components supplied by Supreme 

Solar Pty Ltd carry a twelve (12) month limited 

warranty and is the only warranty given in 

respect of these components of the Product.

Exclusions

7   Supreme Solar Pty Ltd will not be liable under 

this warranty where Supreme Solar Pty Ltd’s 

reasonable opinion a defect is caused by:

 

(a)  fair wear and tear;

 

(b)   negligent, careless or improper use or 

handling;

 

(c)   non-adherence to operating, cleaning or 

Summary of Contents for HEATSEEKER





























Reviews: