06
Heatseeker Solar Pool Heating
Installation & User Manual
ENTER BUTTON
Pressing the button will turn on the LCD backlight, pressing the button while
the backlight is lit will enter the SETTINGS MENU;
The following will be displayed; 1) EXIT
The menu system can be navigated using the or buttons, all selectable and
changeable values will flash on the LCD screen. Press the
button to accept the
currently displayed (flashing) item.
All menu items are shown below;
1) EXIT
2) CLOCK
3) SYSTEM
1) EXIT
Press on this menu to return to automatic operation.
2) CLOCK
When selecting the clock you will have to set the time of day. Set hours then
minutes.
3) SYSTEM
System sub-menu;
EXIT
COOLING
LCD TIME
HOURS
SYSTEM SUB-MENU
EXIT
Press
on this menu to return to automatic operation.
COOLING
For situations where the pool water overheats beyond the set temperature limit
due to direct heating from the sun.
NOTE that heating & cooling is only allowed during the allowable time if solar run hours have
been selected
LCD TIME
Adjust the number of seconds the backlight remains on after the time a button was
pressed. (Select NONE for always on.)
HOURS
For hours of solar operation (24hr Clock). First selecting the start time in hour
intervals (6:00 – 12:00). Then the end time (12:00 – 21:00)
Factory default for installer setup is run from 12:00-12:00 (24hrs).
Summary of Contents for HEATSEEKER
