suprema BioEntry P2 Installation Manual Download Page 28

  Appendices 

28 

 

c) For a Combined Work that displays copyright notices during execution, include the copyright notice for the Library among these 

notices, as well as a reference directing the user to the copies of the GNU GPL and this license document. 

 

d) Do one of the following: 

-

 

0) Convey the Minimal Corresponding Source under the terms of this License, and the Corresponding Application Code in a 

form suitable for, and under terms that permit, the user to recombine or relink the Application with a modified version of the 

Linked Version to produce a modified Combined Work, in the manner specified by section 6 of the GNU GPL for conveying 
Corresponding Source. 

-

 

1) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (a) uses at run time a 

copy of the Library already present on the user's computer system, and (b) will operate properly with a modified version of the 

Library that is interface-compatible with the Linked Version. 

 

e) Provide Installation Information, but only if you would otherwise be required to provide such information under section 6 of the 
GNU GPL, and only to the extent that such information is necessary to install and execute a modified version of the Combined Work 

produced by recombining or relinking the Application with a modified version of the Linked Version. (If you use option 4d0, the 

Installation Information must accompany the Minimal Corresponding Source and Corresponding Application Code. If you use option 

4d1, you must provide the Installation Information in the manner specified by section 6 of the GNU GPL for conveying Corresponding 

Source.) 

 

5. Combined Libraries. 

You may place library facilities that are a work based on the Library side by side in a single library together with other library facilities that 

are not Applications and are not covered by this License, and convey such a combined library under terms of your choice, if you do both of 

the following: 

 

a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities, 

conveyed under the terms of this License. 

 

b) Give prominent notice with the combined library that part of it is a work based on the Library, and explaining where to find the 

accompanying uncombined form of the same work. 

 

6. Revised Versions of the GNU Lesser General Public License. 

The Free Software Foundation may publish revised and/or new versions of the GNU Lesser General Public License from time to time. Such 

new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. 
 

Each version is given a distinguishing version number. If the Library as you received it specifies that a certain numbered version of the GNU 

Lesser General Public License “or any later version” applies to it, you have the option of following the terms and conditions either of that 

published version or of any later version published by the Free Software Foundation. If the Library as you received it does not specify a 

version number of the GNU Lesser General Public License, you may choose any version of the GNU Lesser General Public License ever 

published by the Free Software Foundation. 

 
If the Library as you received it specifies that a proxy can decide whether future versions of the GNU Lesser General Public License shall 

apply, that proxy's public statement of acceptance of any version is permanent authorization for you to choose that version for the Library. 

 

OpenSSL License 

Copyright (c) 1998-2017 The OpenSSL Project.    All rights reserved. 

 

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are 

met: 

1.

 

Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.   

2.

 

Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the 

documentation and/or other materials provided with the distribution. 

3.

 

All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product 

includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)" 

4.

 

The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software 

without prior written permission. For written permission, please contact 

[email protected]

5.

 

Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written 
permission of the OpenSSL Project. 

6.

 

Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by 

the OpenSSL Project for use in the OpenSSL Toolkit (

http://www.openssl.org/

)"   

 

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 

LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.    IN NO EVENT 

SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, 

OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 

LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED 

OF THE POSSIBILITY OF SUCH DAMAGE. 

 

Summary of Contents for BioEntry P2































Reviews: