suprema BioEntry P2, Installation Manual

Page: 18 / 30

Product specifications
18
Product specifications
Category Feature Specification
Credential
Biometric Fingerprint
RF Option
•
BEW2-OHP: 125kHz HID Prox
•
BEW2-ODP: 125kHz EM & 13.56Mhz MIFARE, MIFARE Plus, DESFire/EV1, FeliCa,
NFC
• BEW2-OAP: 125kHz EM, HID Prox & 13.56Mhz MIFARE, MIFARE Plus, DESFire/EV1,
FeliCa, iCLASS SE/SR, NFC
RF read range
*
MIFARE/DESFire/EM/HID Prox/iCLASS : 50 mm, FeliCa: 30 mm
General
CPU 1.2 GHz Quad Core
Memory 2GB Flash + 256 MB RAM
LED Multi-color
Sound Multi-tone Buzzer
Operating temperature -20°C - 50°C
Storage temperature -40°C - 70°C
Operating humidity 0% - 80%, non-condensing
Storage humidity 0% - 90%, non-condensing
Dimension (W x H x D) 50 mm x 172 mm x 43.5 mm (Bottom) / 38.2 mm (Top)
Weight
Device: 251g
Bracket: 43g (Including washer and bolt)
IP rating IP67
IK rating IK09
Certificates CE, FCC, KC, RoHS, REACH, WEEE
Fingerprint
Image dimension 272 x 320 pixels
Image bit depth 8bit, 256 grayscale
Resolution 500 dpi
Template SUPREMA / ISO 19794-2 / ANSI 378
Extractor / Matcher MINEX certified and compliant
LFD Supported
Capacity
Max. User (1:1) 500,000
Max. User (1:N) 100,000
Max. Template (1:1) 1,000,000 (Two templates per finger)
Max. Template (1:N) 200,000 (Two templates per finger)
Max. Text Log 1,000,000
Interface
Ethernet Supported (10/100 Mbps, auto MDI/MDI-X)
RS-485 1ch Master / Slave (Selectable)
Wiegand 1ch Input / Output (Selectable)
TTL input 2ch Input
Relay 1 Relay
PoE Supported (Power over Ethernet 44 VDC Max 12 W, IEEE 802.3af)
Tamper Supported
Electrical
Power
Voltage: DC 12 V, Current: Max. 600 mA
* Use 12VDC, 1.5A power supply.
Switch input V
IH
Min. 3 V
Max. 5 V
Switch input V
IL
Max. 1 V
Switch Pull-up resistance 4.7 k
Ω
(The input ports are pulled up with 4.7 k
Ω
.)
Wiegand output V
OH
More than 4.8 V
Wiegand output V
OL
Less than 0.2 V
Wiegand output Pull-up
resistance
Internally pulled up with 1 k
Ω
Relay
Voltage: Max. 30VDC
Current: 1A
* RF read range will vary depending on the installation environment.
* Access control feature (UL294 specification)
Destructive attack - level2, Line security - level2, Endurance - level1, Standby power- level1