- 24 -
>>
backside safe chamfering(middle)
>>
backside safe chamfering(large)
8.Lens processing mode
：
>>Optical Center mode
>>Geometric center mode
9.Polishing choice
：
>>polish
>>not polish
10.Others
：
>>unlock the lens
>>start to proceeding
>>stop proceeding
>>proceeding size
>>
retouch
11.Clamping pressure
：
>>(level one)Fragile lens
>>(level two)normal lens
>>(level three)slippery lens
>>return
3.3 LENS PROCESSING
3.3.1
C
LAMP
/
REMOVE THE LENSES
>
Clip the lens into grinding window
After all the grinding data is entered, clamp the lens
；
Each kind of lens should choose appropriate clamp.
19 mm diameter adaptors25 mm diameter adaptors
The warning information will display if the processed lenses needs special clamp,as the following
figure
：
19mm small clamp
25mm big clamp
