- 12 -
Follow the steps below to connect the water supply pipe to the edger and fix it.
#1 Check if the machine switch is disconnected,ON / OFF switch in the OFF
position,the main power plug is disconnected.
#2 Check the water supply system is closed.
#3 Make sure the machine level => can be adjusted with 4 foot screws.
#7 If the water supply is clogged, check the permeability of the pipe,
especially around the solenoid valve.
#4 Connect the drain pipe to the base.
#5 Connect the water supply pipe to running water pipe or water pump.
#6 If running water, you need to connect the drain pipe.
#8Connect the water pump or solenoid valve to the power supply of the
water pump.
