- 6 -
[4] RECORD (REC) button/ light
Press this button to enter Record Pause mode. In
Record Pause mode, press this button to begin
recording. When the One Touch Recording feature
is ON (see Menus pg. 19), press this button to
bypass Record Pause mode and begin recording
after 3 seconds. Also used when finalizing a CD.
(see pg. 16)
[5] FINALIZE button / light
Press this button to enter CD-R Finalize mode (pg.
16).
[6] ERASE button / light
Use to enter Erase mode (CD-RW only) (pg. 16).
[7] SELECT jog wheel
This is the master control for the PSD330. For
most functions, scroll through choices with the
SELECT jog wheel, then press the wheel to
accept your choice.
• In Play mode, turn to select a track.
• When recording, turn to adjust recording level.
• After the MENU/STORE button is pressed, turn
the SELECT jog wheel to scroll through menu
selections and make adjustments.
[8] SYNC RECORD ON/OFF button
Press this button to enter Sync Record mode (see
pg.16). Turn the SELECT jog wheel to view Sync
Record options and press ENTER to confirm
selection. A blank CD-R or CD-RW disc must be
placed in the disc drive to make this feature
active.
[9] MENU/STORE button
Press this button to enter Menu mode. Menu
selections and changes are made using the
SELECT jog wheel. Turn the SELECT jog wheel to
scroll through options. Press the SELECT jog wheel
to select an option. Press the MENU/STORE button
to store changes and exit Menu mode. (For a
complete list of menu selections see pg. 19).
[10] DISPLAY (DISP) button
Press the DISPLAY button once to display the
remaining play time for the current track. The
display reads “TRACK.”
Press the button a second time to display the
remaining play time for the entire CD. The display
reads “TOTAL TRACK.” Press the DISPLAY button
again to return to the default display showing
elapsed track time.
[11] TRACK INCREMENT (TR INC)
button
During recording press this button to manually
create a new track. RECOMMENDED: When using
this feature, set AUTO TRACK to OFF (See pg. 20).
[12] STANDBY light
STANDBY light is lit when power is switched OFF by
the Standby POWER switch on the unit or remote.
[13] Standby POWER switch
Slide the Standby POWER switch to the right to turn
power ON or OFF. The MASTER POWER button on
rear of unit must be ON (the red STANDBY light
must be lit).
[14] Display
1.
Record indicator -
Lit when recording.
2.
Pause indicator -
Lit when recording or
when playback has been paused.
3.
Play indicator -
Lit during recording or
playback.
