- 15 -
Effects Processor
OFF
ON
Phantom Power
ON/ OFF
FOOT
PEDAL
R
L
IN
OUT
OUT
IN
POWER
VARI
FIXED
IN
RC-5
Level
DIGITAL
AUX
OUT
LINE
Input
Creating New Tracks Manually
Every time you press STOP or PAUSE during the recording
process, you will create a new track. To create new tracks
during recording, press the TR INC button on the top panel
or the IR remote. You can create up to 99 tracks on a CD-
R or CD-RW disc.
Auto Track Mode
When copying prerecorded material from external
sources, tracks can be set automatically by using
AUTO TRACK Mode. From Record Pause mode, press
the MENU/STORE button and select “AUTO TRACK.”
Change the AUTO TRACK status to ON by turning the
SELECT jog wheel. Press it to accept the change. Press
the MENU/STORE button to exit and proceed with
recording. The unit will then increment tracks when
audio falls below a threshold of silence (-40dB) for a
minimum of three seconds.
Minute Track Mode
MINUTE TRACK will automatically create a seamless,
inaudible track increment every minute during recording.
That means each track is one minute long, offering a quick
and convenient way to locate a particular time in a
recording. For example, Track 10 is ten minutes into the
recording, and Track 17 is 17 minutes into the recording.
To access this mode from Record Pause mode, press the
MENU/STORE button, then select “AutoTrack.” Select
“MIN” and press ENTER.
Recording from the DIGITAL INPUT
Certain mixers and outboard effects processors are
equipped with digital outputs. If you are recording
with equipment that has a coaxial digital output,
connect to the PSD330’s DIGITAL IN. Follow the same
recording steps from pg. 14, with the exception of
step #3. When recording digital equipment, set the
Input switch to “DIGITAL.”
SIDEBAR
Track Increments
