Supero X9DRW-3F, User Manual

Page: 16 / 107

1-8
X9DRW-3F/X9DRW-iF Motherboard User’s Manual
SAS/SATA/SCU Connection
•
Eight (8) Connections 0~3, 4~7 (For X9DRW-3F),
•
Four (4) Connections 0~3 (For X9DRW-iF)
•
RAID 0, 1, 10
IPMI 2.0
•
IPMI 2.0 supported by the Renesas BMC
Serial (COM) Port
•
Two (2) Fast UART 16550 connections: 9-pin RS-
232 port
Note
: COM2 does not support modem func-
tion)
VGA
•
Backplane VGA Port 1
Peripheral
Devices
USB Devices
•
Four (4) USB ports on the rear I/O panel (USB 0/1,
USB 2/3),
•
Two (2) Front Panel USB headers (USB 4/5)
BIOS
•
16 MB AMI BIOS
®
Flash EEPROM
•
APM 1.2, PCI 2.3, ACPI 1.0/2.0/3.0/4.0, USB Key-
board, Plug & Play (PnP) and SMBIOS 2.3
Power
•
ACPI/ACPM Power Management
Management
•
Main switch override mechanism
•
Power-on mode for AC power recovery
•
Keyboard Wake-up from Soft-off
•
Intel
®
Intelligent Power Node Manager (Available
when the NMView utility is installed in the system)
•
Manageability Engine
PC Health CPU Monitoring
Monitoring
•
Onboard voltage monitors for onboard chipset,
memory, processors, standby power, and other criti-
cal components.
•
CPU 6-Phase switching voltage regulator
•
CPU/System overheat LED and control
•
CPU Thermal Trip support
•
Thermal Monitor 2 (TM2) support