Supero X9DRW-3F, User Manual

Page: 32 / 107

2-8
X9DRW-3F/X9DRW-iF Motherboard User’s Manual
X9DRW-3F/iF
Rev. 1.02
Removing Memory Modules
Press both notches on the ends of the DIMM module to unlock it. Once it is loos-
ened, remove it from the memory slot.
6. Press the release tabs to the locked positions to secure the DIMM module
into the slot.
Press both notches straight
down into the memory slot at
the same time.
Notes:
1. For proper memory installation, be sure to install a DIMM module into
the P2-DIMMG1 slot before inserting a 4-pin power connector into JPW4
as shown in the graphics below.
2. To provide clearance for proper memory installation, please lock the
release tab at the end of P1-DIMMA1, marked "A", into the locking posi-
tion before inserting a DIMM module into the P2-DIMMH2 slot. Also, lock
the tab, marked "B", before installing a DIMM module into P1-DIMMA1.
X9DRW-3F/iF
Rev. 1.02
B
A