Supero X8DA6, User Manual

Page: 81 / 91

Chapter 4: AMI BIOS
4-21
BIOS SETUP UTILITY
Main Advanced
Security Boot Exit
vXX.XX (C) Copyright 1985-2009, American Megatrends, Inc.
Security Settings
Supervisor Password : Not Installed
User Password
: Not Installed
Change Supervisor Password
Change User Password
Boot Sector Virus Protection [Disabled]
Install or Change the
password.
Select Screen
Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
Clear event log
This option clears the Event Log memory of all messages. The options are OK
and Cancel.
PCI Error Log
Use this option to enable PCI error (PERR) logging. The options are Yes and No.
4-4 Security Settings
The AMI BIOS provides a Supervisor and a User password. If you use both pass-
words, the Supervisor password must be set fi rst.
Supervisor Password
This item indicates if a Supervisor password has been entered for the system. "Not
Installed" means a Supervisor password has not been used.
User Password
This item indicates if a user password has been entered for the system. "Not In-
stalled" means that a user password has not been used.
Change Supervisor Password
Select this feature and press <Enter> to access the submenu, and then enter a
new Supervisor Password.
User Access Level (Available when Supervisor Password is set as above)
Use this feature to set the user's access level. The options are:
Full Access
•
: Select this item to grant a user a full access to the Setup Utility.
View Only: Select this item to allow the user to access the Setup Utility without
•
making changes.