4-14
X8DA6/X8DAE
User’s Manual
IDE Detect Timeout (sec)
Use this feature to set the time-out value for the BIOS to detect the IDE devices
installed in the system. The options are 0 (sec), 5, 10, 15, 20, 25, 30, and
35
.
PCI/PnP Confi guration
Clear NVRAM
This feature clears the NVRAM during system boot. The options are
No
and Yes.
Plug & Play OS
Selecting Yes allows the OS to confi gure Plug & Play devices. (This is not required
for system boot if your system has an OS that supports Plug & Play.) Select
No
to
allow the AMI BIOS to confi gure all devices in the system.
PCI Latency Timer
This feature sets the latency Timer of each PCI device installed on a PCI bus. Select
64 to set the PCI latency to 64 PCI clock cycles. The options are 32,
64
, 96, 128,
160, 192, 224 and 248.
SR-IOV Supported
Select Enabled to enable Single Root I/O Virtualization (SR-IOV) support which
works in conjunction with the Intel Virtualization Technology and allow multiple
operating systems running simultaneously within a single computer via natively
share PCI-Express devices to enhance network connectivity and performance. The
options are Enabled and
Disabled
.
PCI IDE Bus Master
When enabled, the BIOS uses PCI bus mastering to read from or write to IDE drives.
The options are Disabled and
Enabled.
Slot 1 Option ROM~Slot 7 Option ROM
Select Enabled to enable Slot 1 Option ROM~Slot 7 Option ROM, which will allow
you to boot the computer from a PCI device installed on a PCI slot specifi ed. The
options are Disabled and
Enabled
.
Onboard LAN Option ROM Select
Select iSCSI to use iSCSI Option ROMs to boot the computer using a network
device. Select PXE to use PXE Option ROMs to boot the computer using a network
device. The options are iSCSI and
PXE
.
Summary of Contents for X8DA6
Page 1: ...X8DA6 USER S MANUAL Revision 1 0b X8DAE...
Page 5: ...Preface v Notes...
Page 86: ...A 2 X8DA6 X8DAE User s Manual Notes...
