Supero X8DA6, User Manual

Page: 71 / 91

Chapter 4: AMI BIOS
4-11

Intel PCI-X Hub Confi guration
PCI Bus A0 Frequency/ PCI Bus B0 Frequency
This feature allows the user to set the frequency for the PCI-X Bus A0 or Bus B0.
The Options are Auto, 33 MHz PCI, 66 MHz PCI, 66 MHz PCI-XM1, 100 MHz
PCI-XM1, and 133 MHz PCI-XM1.
I/O Port Decode
This feature is used to select the decode range for the onboard IO connections.
The settings are 4 K Decode , and 1K Decode.
RAS Sticky Error Handling
This feature is used to specify how sticky RAS errors will be handled. The settings
are Clear Errors , and Leave Errors.
VGA 16-Bit Decode
Select Enabled to enable 16-Bit decode support for VGA devices behind the PXH
connection. The settings are Enabled , and Disabled.

IDE/SATA Confi guration
When this submenu is selected, the AMI BIOS automatically detects the presence
of the IDE devices and displays the following items:
SATA#1 Confi guration
If Compatible is selected, it sets SATA#1 to legacy compatibility mode, while se-
lecting Enhanced sets SATA#1 to native SATA mode. The options are Disabled,
Compatible and Enhanced .
Confi gure SATA#1 as
This feature is used to select the drive type for SATA#1. The options are IDE,
RAID Intel, RAID Adaptec, and AHCI.
SATA#2 Confi guration
Select Enhanced to set SATA#2 to native SATA mode. The options are Disabled,
and Enhanced .
Primary IDE Master/Slave, Secondary IDE Master/Slave, Third IDE Master,
and Fourth IDE Master
These settings are used to set the parameters of the IDE drives specifi ed. Press
<Enter> to activate the following submenu screen for detailed options. Set the cor-
rect confi gurations accordingly.