Supero X8DA6, User Manual

Page: 75 / 91

Chapter 4: AMI BIOS
4-15
Load Onboard LAN1/LAN2 Option ROM
Select Enabled to enable onboard LAN1/LAN2 Option ROM. This is to boot the
computer using a network interface. The options are Enabled and Disabled.
LSI SAS2 2008 Option ROM
Select Enabled to enable the LSI SAS2 2008 Option ROM. This is to boot the
computers using a network interface. The options are Enabled and Disabled.

Super IO Device Confi guration
Onboard Floppy Controller
Select Enable to enable the onboard Floppy Controller. The options are Enabled
and Disabled.
Floppy A/Floppy B
This feature allows the user to select the type of fl oppy drive connected to the sys-
tem as specifi ed. The options are Disabled, 360KB 5 1/4", 1.2MB 5 1/4", 720KB 3
1/2", 1.44MB 3 1/2" and 2.88MB 3 1/2". The default setting for Floppy A is 1.44MB
3 1/2" , and for Floppy B is Disabled.
Serial Port1 Address/ Serial Port2 Address
This option specifi es the base I/O port addresses and the Interrupt Request ad-
dresses of Serial Port 1 and Serial Port 2. Select Disabled to prevent the serial port
from accessing system resources. When this option is set to Disabled, the serial
port physically becomes unavailable. Select 3F8/IRQ4 to allow the serial port to
use 3F8 as its I/O port address and IRQ 4 for the interrupt address. The options for
Serial Port1 are Disabled, 3F8/IRQ4 , 3E8/IRQ4, 2E8/IRQ3. The options for Serial
Port2 are Disabled, 2F8/IRQ3 , 3E8/IRQ4, and 2E8/IRQ3.
Serial Port 2 Mode
Use this feature to confi gure Serial Port 2 mode. The options are Normal, IrDA
and ASK IR. IrDA (Infrared Data) is an industry standard for remote control de-
vices. ASK IR (Amplitude Shifted Keying Infrared) is a protocol compatible with
Sharp® branded PDAs and other infrared devices.

Remote Access Confi guration
Remote Access
This allows the user to enable the Remote Access support. The options are Dis-
abled and Enabled.
If Remote Access is set to Enabled, the following items will display: