Supero X7SB3, User Manual

Page: 69 / 101

Chapter 4: BIOS
4-5
Maximum Capacity: This item displays the maximum capacity in the LBA
Format. ( Note : The default setting changes when different devices are
installed.)
Multi-Sector Transfers
This item allows the user to specify the number of sectors per block to be used
for multi-sector transfer. The options are
Disabled , 2 Sectors, 4 Sectors, 8 Sec-
tors, and 16 Sectors. ( Note : The default setting changes when different devices
are installed.)
LBA Mode Control
This item determines whether the Phoenix BIOS will access the IDE Primary
Master device via the LBA mode. The options are Enabled and
Disabled. ( Note :
The default setting changes when different devices are installed.)
32-Bit I/O
Select Enable to enable the function of 32-bit IDE data transfer. The options
are Enabled and
Disabled . ( Note : The default setting changes when different
devices are installed.)
Transfer Mode
This option allows the user to set the transfer mode. The options are Standard ,
Fast PIO1, Fast PIO2, Fast PIO3, Fast PIO4, FPIO3/DMA1 and FPIO4/DMA2.
(
Note : The default setting changes when different devices are installed.)
Ultra DMA Mode
This option allows the user to configure the Ultra DMA Mode. The options are
Disabled , Mode 0, Mode 1, Mode 2, Mode 3, Mode 4, and Mode 5. ( Note : The
default setting changes when different devices are installed.)
Installed Memory
This feature informs you how much memory is installed in the system as detected
by the BIOS.
System Memory
This feature informs you how much system memory is available as detected by
the BIOS.