Supero X7SB3, User Manual

Page: 13 / 101

Chapter 1: Introduction
1-5
Connector Label Description
B1 17 Onboard Battery
BIOS Chip 15 Phoenix SPI BIOS Chip
COM1/COM2 3/22 COM1/COM2 Serial Port/Header
Fans 1~5
Fan1:59,Fan2: 53,
Fans 1~5: Chassis/CPU/System Fans Fan3:52,Fan4: 43,
Fan5: 8
Floppy 46 Floppy Drive Connector
I-Button 45 I-Button Socket
J3P (Optional) 61 Redundant PWR Fail Detect (for internal use)
IPMI LAN 2 Dedicated LAN for IPMI (X7SB3-F only)
JAR 60 Alarm Reset
JD1 20
Onboard Speaker Header (Pins 3~4: Internal
Buzzer, Pins 1~4: External Speaker)
JF1 56 Front Panel Control Connector
JL1 34 Chassis Intrusion Header
JLAN 1~2 6/7 Gigabit Ethernet (RJ45) Ports
JLED1 57 Onboard Power LED
JPW1 63 ATX Main Power Connector
JPW2 58 12V 8-Pin Auxiliary PWR Connector
JWOL 26 Wake-On-LAN Header
JWOR 16 Wake-On-Ring Header
KB/MS 1 PS/2 Keyboard/Mouse
PW4 (X7SB3-F) 62 Power Supply SMB (I
2
C) Connector
SAS 0~7 35~42 Serial_Attached SCSI Connectors
(I-)SATA 0/1 29/30 (Intel South Bridge) Serial_ATA Ports 0~1
(3-)SGPIO 1/2 32/33 Serial-Link General Purpose I/O Headers
SPKR1 19 Internal Buzzer/Speaker
USB 0/1 2 Back Panel USB Ports#0~1
USB 2,USB 3 44/48 Front Panel Accessible USB Connectors 2~3
USB 4~5, 6~7 24/27 Front Panel USB Ports 4~5, 6~7
VGA 5 VGA Connector
LED Label Description Status
LE1 54 Onboard Standby Power LED Green: On (PWR On)
LE2 12 IPMI Heartbeat LED (X7SB3-F) Green: Blinking (IPMI Ready)
LE3/LE4 28/25 BIOS POST Codes LED (Reserved for Internal Use)
LE5 51 SAS Heartbeat LED Yellow: Blinking (SAS Ready)
LED1 50 SAS Activity LED Green: Blinking (SAS Active)
Note: Jumper JPB (14) is used for factory debug puposes only.