1-6
Introduction
X6DAL-XTG User's Manual
Motherboard Features
CPU
•
Single or dual Intel
®
604-pin Nocona
TM
processors (*w/EM64T support)
at 800 MHz front side (system) bus speed.
M e m o r y
•
Six 184-pin DIMM sockets supporting 12 GB/24GB Registered ECC DDR
333/266 (PC2700/PC2100) SDRAM
Notes: 1. Memory size is set via BIOS. 2. Interleaved memory; requires memory modules to be
installed in pairs. See Section 2-3 for details.
Chipset
•
Intel E7525 (Tumwater) chipset
Expansion Slots
•
One PCI-E (x16@4GB/sec) slot
• Two 64-bit 66MHz PCI-X slots
•
Two 32-bit 33MHz PCI slots
BIOS
•
8 Mb AMI
®
Flash ROM
•
APM 1.2, DMI 2.1, PCI 2.2, ACPI 2.0, Plug and Play (PnP), SMBIOS 2.3
PC Health Monitoring
•
Onboard voltage monitors for CPU cores, chipset voltage, 3.3V, +5V,
+
12V, 3.3V standby, and DIMM voltage.
•
Fan status monitor with fan speed control via BIOS
•
CPU/chassis temperature monitors
•
Environmental temperature monitor and control via Supero Doctor III
•
CPU fan auto-off in sleep mode
•
CPU slow-down on temperature overheat
•
CPU thermal trip support for processor protection, +5V standby alert
LED
•
Power-up mode control for recovery from AC power loss
•
Auto-switching voltage regulator for CPU core
•
System overheat LED and control
•
Chassis intrusion detection
•
System resource alert via Super Doctor III
