Chapter 1: Introduction
1-5
Introduction
Jumper
Description
Default
Setting
CN1
Alarm Reset
Open (Disabled)
J13
SMB Data to PCI Enable
Closed (Enabled)
J15
SMB Clock to PCI Enable
Closed (Enabled)
J26
Audio Enable
Closed (Enabled)
JBT1
Clear CMOS
See Chapter 2
JPF
Force Power On Enable
Open (Disabled)
JPL1
LAN1 Enable
Pins 1-2 (Enabled)
JPS1
Marvell's SATA Enable
Pins 1-2 (Enabled)
JWD
Watch Dog Enable
Pins 2-3 (NMI)
Connector
Description
ATX PWR
Primary 24-pin ATX PWR Connector
PWR2/PWR 3
12V 8-pin CPU PWR/12V 4-pin PWR Connectors
COM1(J4)/COM2 (J5)
COM1/COM2 Serial Port Connectors
DS7, DS8
POST Code LED (*See Appendix A)
FAN #1-#6
CPU/Chassis Fans Headers
DIMM#1A-#3B
Memory (DIMM) Slots#(1A,1B, 2A,2B, 3A,3B)
LAN 1
G-bit Ethernet Port
IDE1, IDE2
IDE1/2 Hard Disk Drive Connectors
J2
Keyboard/Mouse
J6
Down: Line_in, Up: Line_out
J7
Power Fault Header
J24
Floppy Disk Drive Connector
J27
Power System Management
J35
SATA SMB (I
2
C) Header
J41
Aux. In
J50
CD in
J61
Microphone
JF1
Front Panel Control (* See Chapter 2)
JF2
Speaker, PWR LED, Keylock (*See Chapter 2)
JL1
Chassis Intrusion Header
JSLED
SATA LED Header
Parallel
Parallel (Printer) Port
PCI slots
Two PCI 32-bit slots
PCI-X slots
Two PCI-X 64-bit 66MHz
PCI-E slot
One PCI-Express x16 @4GB/sec slot
H-SATA 0/1 (JS0/JS1) Hance Rapids-Serial ATA Ports 0/1
SATA0-3(J52-J55)
Marvel-Serial ATA Ports 0/1/2/3
WOL(JWOL)
Wake-on-LAN
WOR (JWOR)
Wake-on-Ring Header
USB 0/1
Back Panel Universal Serial Bus Ports
USB 2/3 (J42)
Front Panel Universal Serial Bus Ports
Quick Reference (X6DAL-XTG)
