4-8
X10DRG-Q Motherboard User’s Manual
Intel® Virtualization Technology (Available when supported by the CPU)
Select Enabled to support Intel
®
Virtualization Technology, which will allow one
platform to run multiple operating systems and applications in independent parti-
tions, creating multiple "virtual" systems in one physical computer. The options
are
Enabled
and Disabled.
Note
: If a change is made to this setting, you will need to reboot the
system for the change to take effect. Refer to Intel’s website for detailed
information.
Advanced Power Management Configuration
This section is used to configure the following CPU Power Management settings.
Power Technology
Select Energy Efficiency to support power-saving mode. Select Custom to cus
-
tomize system power settings. Select Disabled to disable power-saving settings.
The options are Disable,
Energy Efficiency
, and Custom.
If the above is set to 'Custom' the following options are displayed:
CPU P State Control
EIST (P-States)
EIST (Enhanced Intel SpeedStep Technology) allows the system to automatically
adjust processor voltage and core frequency to reduce power consumption and
heat dissipation. The options are Disabled, and
Enabled.
Turbo Mode (Available when Intel® EIST Technology is enabled)
Select Enabled to use the Turbo Mode to boost system performance. The options
are
Enabled
and Disabled.
P-State Coordination
This feature allows the user to change the P-State (Power-Performance State)
coordination type. P-State is also known as "SpeedStep" for Intel processors. Se-
lect HW_ALL to change the P-State coordination type for hardware components
only. Select SW_ALL to change the P-State coordination type for all software
installed in the system. Select SW_ANY to change the P-State coordination
type for a software program in the system. The options are
HW_All,
SW_ALL,
and SW_ANY.
II01 Port 1B Link Speed
Use this item to configure the link speed of a PCI-E port specified by the
user. The options are Gen 1 (Generation 1) (2.5 GT/s), Gen 2 (Generation
2) (5 GT/s) and
Gen 3 (Generation 3) (8 GT/s)
.
IOU0 (II0 PCIe Port 2)
This item configures the PCI-E port Bifuraction setting for a PCI-E port
specified by the user. The options are x4x4x4x4, x4x4x8, x8x4x4, x8x8,
x16, and
Auto
