Supero SuperWorkstation 7038A-I, User Manual

Page: 93 / 122

Chapter 7: BIOS
7-13
Isoc Mode
Select Enable for Isochronous support to meet QoS (Quality of Service) require-
ments. This feature is especially important for Virtualization Technology. The
options are Enable and
Disable .

Memory Configuration
Enforce POR
Select Enabled to enforce POR restrictions on memory frequency and voltage
programming. The options are
Enabled and Disabled.
Memory Frequency
Use this feature to set the maximum memory frequency for onboard memory
modules. The options are
Auto ,1333, 1400, 1600, 1800, 1867, 2000, 2133,
2200, 2400, 2600, 2667, 2800, 2993, 3000, 3200 and Reserved (Do not select
Reserved).
Data Scrambling
Select Enabled to enable data scrambling to enhance system performance and
data integrity. The options are
Auto , Disabled and Enabled.
DRAM RAPL (Running Average Power Limit) Baseline
Use this feature to set the run-time power-limit baseline for the DRAM modules.
The options are Disable, DRAM RAPL Mode 0, and
DRAM RAPL Mode 1
.
Set Throttling Mode
Throttling improves reliability and reduces power consumption in processors via
automatic voltage control during processor idle states. The options are Disabled
and
CLTT (Closed Loop Thermal Throttling).
Socket Interleave Below 4GB
Select Enabled for the memory above the 4G Address space to be split between
two sockets. The options are Enable and
Disable .
A7 Mode
Select Enabled to support the A7 (Addressing) mode to improve memory per-
formance. The options are
Enable and Disable.