Supero SuperWorkstation 7038A-I, User Manual

Page: 53 / 122

Chapter 5: Advanced Serverboard Setup
5-13
Jumper Description Default Setting
JBT1 Clear CMOS See Section 5-10
JI
I2
C1/JI
I2
C2 SMBus to PCI-E Slots Pins 2-3 (Normal)
JPL1 GLAN1 & GLAN2 Enable/Disable Pins 1-2 (Enabled)
JPL2 GLAN2 Enable/Disable Pins 1-2 (Enabled)
JPME2 Manufacturer Model Select Pins 1-2 (ME Mode)
JWD1 Watch Dog Pins 1-2 (Reset)
Connector Description
Audio_FP (JA1) Audio Connector for Front Access
JAudio1 7.1 HD (8-channel High-Definition) Audio Connector
CPU1 Slot1/Slot3 PCI-E 3.0 x16 Slots (available when CPU1 is installed)
CPU2 Slot5
PCI-E 3.0 x16 Slot (available when CPU2 is installed)
CPU2 Slot2 PCI-E 3.0 x8 Slot (available when CPU2 is installed)
CPU2 Slot4 PCI-E 3.0 x8 Slot (available when CPU2 is installed)
PCH Slot6 PCI-E 2.0 x4 in x8 Slot
FAN1-7, FANA CPU/System Fan Headers
J24 ATX 24-Pin Power Connector
JD1 Speaker/Power LED Indicator
JF1 Front Panel Control Header
JL1 Chassis Intrusion Header
JPI
I2
C1 Power Supply SMBbus I
2
C Header
JPWR1/JPWR2 12V 8-Pin Power Connectors
JSD1/JSD2 Powered SATA DOM Connectors 1/2
JSPDIF_In SPDIF (Sony/Philips Digital Interface) In Header
JSPDIF_Out SPDIF (Sony/Philips Digital Interface) Out Header
JTBT1 GPIO (General-Purpose I/O) Header for Thunderbolt Add-on Card
JTPM1 TPM (Trusted Platform Module)/Port 80 Header
LAN1/LAN2 Gb Ethernet Ports 1/2
I-SATA0-9 SATA Ports (supported by Intel PCH)
STBY1 Standby Power Header
T-SGPIO 1/2/3 Serial-Link General_Purpose IO Headers 1/2/3
USB 0/1 (2.0) Rear USB 2.0 Ports
USB2/3, USB9/10 Front-accessible USB 2.0 (USB2/3) and 3.0 (USB9/10) Headers
USB 4 (2.0)
Type A USB 2.0 Connector USB 4
USB5/6/7/8 Rear USB 3.0 Ports