manualshive.com logo in svg

Supero SuperWorkstation 7038A-I, User Manual

Share
Download
Supero SuperWorkstation 7038A-I User Manual Download Page 112

7-32

S

uper

W

orkstation 7038A-I User's Manual

• 

Dual Boot Order #9

• 

Dual Boot Order #10

• 

Dual Boot Order #11

• 

Dual Boot Order #12

• 

Dual Boot Order #13

• 

Dual Boot Order #14

• 

Dual Boot Order #15

Add New Boot Option

Use this item to select a new boot device to add to the boot priority list.

Add Boot Option

Select the target boot device to add to the boot priority list.

Path for Boot Option

Select the device path (-the file system) for the new boot device to use.

Create

After selecting a boot device to add and the path for this new device, choose this 
feature and click OK to add the new device to the boot priority list.

Delete Boot Option

Use this item to select a boot device to delete from the boot priority list.

Delete Boot Option

Select the target boot device to delete.

Hard Disk Drive BBS Priorities

• 

Boot Order #1

• 

Boot Order #2

Network Drive BBS Priorities

• 

Boot Order #1

Summary of Contents for SuperWorkstation 7038A-I



























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands