Supero SuperWorkstation 5037A-i2-MA015, User Manual

Page: 36 / 50

3-16
S
uper
W
orkstation 5037A-i2-MA015 User's Manual
3-8 Power Supply
The 5037A-i2-MA015 includes a 900 Watt power supply. In the unlikely event that
it becomes necessary to replace the power supply, follow the instructions below.
Preparation
Begin by removing power from the system as described on page 3-1.
Changing the Power Supply
1. Disconnect the chassis from any power source.
2. Disconnect the motherboard cables.
3. Remove the screws securing the power supply to the chassis, which are
located on the rear of the chassis. Set these screws aside for later use.
4. Gently lift the power supply out of the chassis.
5. Replace the failed power supply with an identical power supply model.
6. Secure the new power supply using the screws previously set aside.
7. Plug the AC power cord back into the module and power-up the system.
Figure 3-11. Removing the Power Supply
Power Supply