Supero SuperWorkstation 5037A-i2-MA015, User Manual

Page: 25 / 50

Chapter 3: Component Installation
3-5
Caution: CPUs only install to the socket in one direction. Make sure that the CPU
is properly inserted into the socket before closing the load plate. If it doesn't close
properly, do not force it as it may damage your CPU. Instead, open the load plate
again and double-check that the CPU is aligned properly.
OPEN 1st OPEN
1st
OPEN 1st OPEN
1st
Lever Lock
Push down
and lock the
lever labeled
'Open 1st'.
Push down and lock the
level labeled 'Close 1st'.
Gently close
the load plate.
7. With the CPU in the socket, in-
spect the four corners of the CPU
to make sure that they are fl ush
with the socket.
8. Close the load plate. Lock the
lever labeled 'Close 1st', then lock
the lever labeled 'Open 1st'. Use
your thumb to gently push the load
levers down until the lever locks.