Supero SUPERSERVER 6037R-TXRF, User Manual

Page: 51 / 104

Chapter 5: Advanced Serverboard Setup
5-23
GLAN LEDs
There are two GLAN ports on the
serverboard. An additional IPMI
dedicated LAN port is also located
above the USB 0/1 ports on the
backpanel. Each Gigabit Ethernet LAN
port has two LEDs. The yellow LED
indicates activity, while the Link LED
may be green, amber or off to indicate
the speed of the connection. See the
tables at right for more information.
Note
: IPMI dedicated LAN does not
operate at 1 Gbps.
5-10 Onboard Indicators
GLAN Link Indicator
LED Settings
LED Color Definition
Off No Connection or 10
Mbps
Green 100 Mbps
Amber 1 Gbps
GLAN Activity Indicator
LED Settings
Color Status Definition
Green Flashing Active
Rear View (when facing
the rear side of the chassis)
Activity LED Link LED
Activity LED Link LED
Onboard Power LED
An Onboard Power LED is located
at LED2 on the serverboard. When
this LED is on, the system is on. Be
sure to turn off the system and unplug
the power cord before removing or
installing components. See the tables
at right for more information.
Onboard PWR LED
Indicator Settings
LED Color Definition
Off System Off (PWR
cable not connected)
Green System On
Green:
Flashing
ACPI S1 State
BMC Activity LED
A BMC Heartbeat LED is located
at LED1 on the serverboard. When
DM1 is blinking, BMC functions
normally. See the table at right for
more information.
BMC Activity LED Indicator
LED Settings
Green: Blinking BMC is active