manualshive.com logo in svg

Supero SUPERSERVER 6027TR-H71FRF, User Manual

Share
Download
Supero SUPERSERVER 6027TR-H71FRF User Manual Download Page 118

B-4

SUPERSERVER 6027TR-H71QRF/H71FRF/H71RF USER'S MANUAL

(continued from front)

The products sold by Supermicro are not intended for and will not be used in life support systems, 
medical equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency 
communication devices or other critical systems whose failure to perform be reasonably expected 
to result in signifi cant injury or loss of life or catastrophic property damage. Accordingly, Supermicro 
disclaims any and all liability, and should buyer use or sell such products for use in such ultra-
hazardous applications, it does so entirely at its own risk. Furthermore, buyer agrees to fully 
indemnify, defend and hold Supermicro harmless for and against any and all claims, demands, 
actions, litigation, and proceedings of any kind arising out of or related to such ultra-hazardous 
use or sale.

Summary of Contents for SUPERSERVER 6027TR-H71FRF























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands