manualshive.com logo in svg

Supero SUPERSERVER 6027TR-H71FRF, User Manual

Share
Download
Supero SUPERSERVER 6027TR-H71FRF User Manual Download Page 110

7-24

SUPERSERVER 6027TR-H71QRF/H71FRF/H71RF USER'S MANUAL

7-5   Boot

This submenu allows the user to confi gure the following boot settings for the 

system.

CSM Support

Select Enabled to enable UEFI Compatibility Support Module (CSM) to provide 

compatibility support to a traditional legacy BIOS which will allow an OS that 

requires CSM support to boot from a traditional option ROM. Select Auto to 

allow the BIOS to automatically enable or disable CSM support based on the OS 

installed in the system. The options are 

Enabled

, Disabled, and Auto 

Boot Option #1

Use this feature to select the fi rst boot drive. Select a LAN device to boot the system 

from the network connection. Select UEFI to boot the system from the UEFI: Built-

in EFI Shell. The options are 

LAN Device

, UEFI: Built-in EFI Shell, and Disabled. 

Boot Option #2

Use this item to select the fi rst boot device. Select a LAN device to boot the system 

from the network connection. Select UEFI to boot the system from the UEFI: Built-

in EFI Shell. The options are LAN Device, 

UEFI: Built-in EFI Shell

, and Disabled.

Network Devices

Delete Boot Options

This feature allows the user to select a boot device to delete from the boot priority 

list. Select UEFI: Built-in EFI Shell to delete it from the boot priority list which will 

prevent system boot from the UEFI Shell. The options are Select One to Delete 

and 

UEFI: Built-in EFI Shell

.

Summary of Contents for SUPERSERVER 6027TR-H71FRF























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands