Supero SuperServer 6026TT-D6IBQRF, User Manual

Page: 68 / 120

5-18
SUPERSERVER 6026TT-HD/D6 Series User's Manual
BMC Activity LED (LE2)
A BMC Heartbeat LED is located at LE2
on the motherboard. When LE2 is on,
BMC (Baseboard Management Controller)
is active. See the table at right for more
information.
BMC Heartbeat LED
On BMC is normal
HDD/SATA LED
(LE3)
Status Defi nition
On HDD/SATA
Connected
Off No connection
HDD/SATA LED (LE3)
An HDD/SATA LED is located at LE3 on the
motherboard. This LED indicates the status
of hard drive activitiy or SATA activity sup-
ported by the South Bridge.
Rear UID LED (LE4)
The Rear UID LED is located at LE4 on
the motherboard. Refer to Section 5-7 for
details.
5-10 SATA and SAS Ports
SATA Connections
A Front Panel Add-On Card header is located
at JF2 on the motherboard. This header
provide onboard SATA support. Plug an
add-on card in JF2 to use SATA connections.
These connections provide serial-link signal
transmission, which is faster than that of the
traditional Parallel ATA.
SAS Connections
SAS is supported on the 6026TT-D6 series of
servers only with the addition of pre-installed
daughter cards. These cards include an LSI
2108 SAS controller for SAS support.