Supero SuperServer 6024H-32, User Manual

Page: 82 / 130

7-12
S
UPER
S
ERVER 6024H-32R/6024H-32 User's Manual
Processor Power Management
( * Available when supported by the CPU.)
This feature allows the user to determine the processor power management
mode. If set to C States only, the processor power will be controlled through CPU
power states in the ACPI setting. Select "GV1/GV3 only" to enable the function of
DBS (Demand Based Switching) which will allow the user to confi gure CPU power
management in the OS. If set to Disabled , C States and GV1/GV3 are disabled. If
set to Enabled, C States and GV1/GV3 are Enabled. ( *Note : please refer to Intel's
web site for detailed information.)
I/O Device Confi guration
Access the submenu to make changes to the following settings.
KBC Clock input
This setting allows you to set the clock frequency for the Keyboard Clock. The
options are 6MHz, 8MHz, 12 MHz and 16MHz.
Onboard COM1
This setting allows you to assign control of Onboard COM1. The options are
Enabled (user defi ned), Disabled, and Auto (BIOS- or OS- controlled).
Base I/O Address
Select the base I/O address for COM1. The options are 3F8 , 2F8, 3E8 and
2E8.
Interrupt
Select the IRQ (interrupt request) for COM1. The options are IRQ3 and
IRQ4 .
Onboard COM2
This setting allows you to assign control of COM2. The options are Enabled
(user defi ned), Disabled, Auto (BIOS controlled) and OS Controlled.
Mode
Specify the type of device that will be connected to COM2. The options are
Normal , and IR (for an infrared device).