Supero SuperServer 6024H-32, User Manual

Page: 54 / 130

5-20
S
UPER
S
ERVER 6024H-32R/6024H-32 User's Manual
LAN1/2 Enable/Disable
Use JPL1 and JPL2 to enable or
disable the LAN1 and LAN2 ports,
respectively. See the table on the
right for jumper settings. The default
setting is enabled.
Watch Dog Enable/Disable
JWD enables the Watch Dog function,
a system monitor that takes action
when a software application freezes
the system. Jumping pins 1-2 will
have WD reboot the system if a pro-
gram freezes. Jumping pins 2-3 will
generate a non-maskable interrupt for
the program that has frozen. See the
table on the right for jumper settings.
Watch Dog must also be enabled in
BIOS.
Note: when Watch Dog is enabled, the user must
write their own application software to disable the
Watch Dog Timer.
LAN1/2 Enable/Disable
Jumper Settings (JPL1/JPL2)
Jumper Setting Defi nition
Pins 1-2 Enabled
Pins 2-3 Disabled
Watch Dog
Jumper Settings (JWD)
Jumper Setting Defi nition
Pins 1-2 Reset
Pins 2-3 NMI
Open Disabled
VGA Enable/Disable
JPG1 allows you to enable or disable
the VGA port. The default position is
on pins 1 and 2 to enable VGA. See
the table on the right for jumper set-
tings.
VGA Enable/Disable
Jumper Settings (JPG1)
Jumper Setting Defi nition
Pins 1-2 Enabled
Pins 2-3 Disabled
I
2
C to PCI Enable/Disable
The JI
2
C1/2 pair of jumpers allow you
to connect the System Management
Bus to the PCI slots. The default set-
ting is closed for both jumpers to en-
able the connection. Both connectors
must have the same setting (JI
2
C1 is
for data and JI
2
C2 is for the clock). See
the table on right for jumper settings.
I
2
C to PCI Enable/Disable
Jumper Settings
(JI
2
C1/2)
Jumper Setting Defi nition
Closed Enabled
Open Disabled