Supero SuperServer 6024H-32, User Manual

Page: 64 / 130

6-4
S
UPER
S
ERVER 6024H-32R/6024H-32 User's Manual
Figure 6-2. System Cooling Fans
6-4 Drive Bay Installation/Removal
Accessing the Drive Bays
SAS/SATA Drives: You do not need to access the inside of the chassis or remove
power to replace or swap SAS/SATA drives. Proceed to the next step for instruc-
tions. Note: You must use standard 1" high, SAS/SATA drives in the SuperServer
6024H-32R/6024H-32.
CD-ROM/Floppy Disk Drive: For installing/removing the CD-ROM or fl oppy disk
drive, you will need to gain access to the inside of the server by removing the top
cover of the chassis. Proceed to the "CD-ROM and Floppy Drive Installation" sec-
tion later in this chapter for instructions.
5.25" Drive Bay: For installing/removing a component in the 5.25" drive bay, proceed
to the "5.25" Drive Bay Installation" section later in this chapter for instructions.
Chassis Cover (removed)
Motherboard
Cover Release Buttons
System Cooling Fans
Power Supply
System Memory