Supero SUPERSERVER 6017R-TDF, User Manual

Page: 46 / 106

5-14
S
UPER
S
ERVER 6017R-TDF User's Manual
NIC1/NIC2 LED Indicators
The NIC (Network Interface Controller)
LED connection for LAN port 1 is located
on pins 11 and 12 of JF1, and the LED
connection for LAN Port 2 is on pins 9
and 10. Attach the NIC LED cables here
to display network activity. Refer to the
table on the right for pin defi nitions.
NIC1/2 LED
Pin Defi nitions (JF1)
Pin# Defi nition
9 Vcc
10 NIC 2 LED
11 Vcc
12 NIC 1 LED
Power Fail LED
The Power Fail LED connection is lo-
cated on pins 5 and 6 of JF1. Refer to
the table on the right for pin defi nitions.
PWR Fail LED
Pin Defi nitions (JF1)
Pin# Defi nition
5 3.3V
6 PWR Supply Fail
Overheat (OH)/Fan Fail/PWR Fail/UID
LED
Connect an LED cable to pins 7 and
8 of JF1 to use the Overheat/Fan Fail/
Power Fail and UID LED connections.
The red LED on pin 7 provides warnings
of overheat, fan failure or power failure.
The blue LED on pin 8 works as the front
panel UID LED indicator. The red LED
takes precedence over the blue LED by
default. Refer to the tables on the right
for pin defi nitions.
OH/Fan Fail/ PWR Fail/Blue_UID
LED Pin Defi nitions (JF1)
Pin# Defi nition
7 Red_LED-Cathode/OH/Fan Fail/
Power Fail5.5V.SB
8 Blue_UID LED
OH/Fan Fail/PWR Fail
LED Status (Red LED)
State Defi nition
Off Normal
On Overheat
Flashing Fan Fail
Reset Button
The Reset Button connection is located
on pins 3 and 4 of JF1. Attach it to a
hardware reset switch on the computer
case. Refer to the table on the right for
pin defi nitions.
Reset Button
Pin Defi nitions (JF1)
Pin# Defi nition
3 Reset
4 Ground