Supero SUPERSERVER 6017R-NTF, User Manual, Page: 72 / 126

5-20
SUPERSERVER
6017R-WRF/NTF USER'S MANUAL
PWR LED Connector
Pin Defi nitions (JD1)
Pin Setting Defi nition
Pin 1 Anode (+)
Pin 2 Cathode (-)
Pin 3 NA
Speaker Connector
Pin Defi nitions
Pin Setting Defi nition
Pins 4~7 External Speaker
Pins 6~7 Internal Speaker
(Default)
Fan Header
Pin Defi nitions
Pin# Defi nition
1 Ground
2 +12V
3 Tachometer
4 PWR Modulation
Fan Headers
This serverboard has six system/CPU
fan headers (Fan 1~Fan 4, Fan A,
Fan B) on the serverboard. All these
4-pin fans headers are backward
compatible with the traditional 3-pin
fans. However, fan speed control is
available for 4-pin fans only. The fan
speeds are controlled by Thermal
Management via Hardware Monitoring
in the Advanced Setting in the BIOS.
(See Chapter 5 for more details.) See
the table on the right for pin defi nitions.
Power LED/Speaker
On JD1 header, pins 1-3 are used for
power LED indication, and pins 4-7 are
for the speaker. See the tables on the
right for pin defi nitions. Please note
that the speaker connector pins (4-7)
are used with an external speaker. If
you wish to use the onboard speaker,
you should close pins 6-7 with a
jumper.
Serial Port Pin Defi nitions
(COM1/COM2)
Pin # Defi nition Pin # Defi nition
1 DCD 6 DSR
2 RXD 7 RTS
3 TXD 8 CTS
4 DTR 9 RI
5 Ground 10 NC
(NC = No connection)
Serial Ports
Two COM connections (COM1 &
COM2) are located on the serverboard.
COM1 is located on the Backplane I/O
panel. COM2, located next to Front
Accessible USB 4/5, is used to provide
front access serial support. See the
table on the right for pin defi nitions.