Supero SUPERSERVER 6017R-NTF, User Manual

Page: 80 / 126

5-28
SUPERSERVER
6017R-WRF/NTF USER'S MANUAL
BMC Heartbeat LED
A BMC Heartbeat LED is located at
DM1 on the serverboard. When DM1 is
blinking, BMC functions normally. See
the table at right for more information.
BMC Heartbeat LED
Status
Color/State Defi nition
Green:
Blinking BMC: Normal
5-11 SATA Drive Connections
Rear UID LED
The rear UID LED is located at LED3
on the rear of the serverboard. This
LED is used in conjunction with the
rear UID switch to provide easy
identifi cation of a system that might be
in need of service. Refer to UID Switch
on Page 2-17 for more information.
UID LED
Status
Color/State Status
Blue: On Unit Identifi ed
Blue: On Unit Identifi ed
Note: For more information on SATA HostRAID configuration, please
refer to the Intel SATA HostRAID User's Guide posted on our Website @
http://www.supermicro.com.
SATA/SCU
Pin Defi nitions
Pin# Defi nition
1 Ground
2 TX_P
3 TX_N
4 Ground
5 RX_N
6 RX_P
7 Ground
SATA/SC8U Ports
There are six Serial ATA ports
(I-SATA0~I-SATA 5) located on the
serverboard, including four SATA2
ports and two SATA3 ports. There
are also eight SCU ports (0~3, 4~7)
located on the X9DRW-3F, and four
SCU ports (SCU 0~3) located on the
X9DRW-iF. These ports provide serial-
link signal connections, which are
faster than the connections of Parallel
ATA. See the table on the right for pin
defi nitions.