Supero SUPERSERVER 5026T-3F, User Manual

Page: 3 / 100

Preface
About This Manual
This manual is written for professional system integrators and PC technicians.
It provides information for the installation and use of the SuperServer 5026T-3-
F/5026T-T. Installation and maintainance should be performed by experienced
technicians only.
The SuperServer 5026T-3F/5026T-T is a high-end, single processor server based
on the SC822TQ-400LPB 2U rackmount server chassis and the X8ST3-F/X8STE
motherboard, which supports single Intel® Core™ i7 and Xeon® or future Intel
Nehalem processor families (next generation Intel Xeon® processor). Refer to
the motherboard specifi cations pages on our web site for updates on supported
processors.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the X8ST3-F/X8STE motherboard
and the SC822TQ-400LPB chassis, which make up the SuperServer 5026T-3-
F/5026T-T.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 5026T-3-
F/5026T-T into a rack and check out the server confi guration prior to powering up
the system. If your server was ordered without processor and memory components,
this chapter will refer you to the appropriate sections of the manual for their instal-
lation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
iii
Preface