Supero SUPERSERVER 5026T-3F, User Manual

Page: 27 / 100

Chapter 3: System Interface
3-3
Power
Indicates power is being supplied to the system's power supply units. This LED
should normally be illuminated when the system is operating.
3-4 Drive Carrier LEDs
SAS Drives (5026T-3F)
Green:
•
When illuminated, the green LED on the front of the SAS drive carrier
indicates drive activity. A connection to the backplane enables this LED to blink
on and off when that particular drive is being accessed.
Red:
•
The SES2 compliant backplane activates the red LED to indicate a drive
failure. If one of the SAS drives fail, you should be notifi ed by your system
management software. Please refer to Chapter 6 for instructions on replacing
failed SAS drives.
SATA Drives (5026T-T)
Green:
•
When illuminated, the green LED on the front of the SATA drive carrier
indicates drive activity. A connection to the SATA backplane enables this LED
to blink on and off when that particular drive is being accessed.
Red:
•
The red LED indicates two states. When blinking, it indicates the drive is
rebuilding. When solid, it indicates a drive failure. If a SATA drive fails, you should
be notifi ed by your system management software. Please refer to Chapter 6 for
instructions on replacing failed SATA drives.